Pic of the Day
- Renegadenemo
- Posts: 5176
- Joined: Mon Dec 01, 2008 12:29 pm
- Location: N E England
- Contact:
Re: Pic of the Day
Equally, now that it's all one colour it's easier to see the dramatic offset of the frame. The foremost bulkhead (F-22) appears to have its hole off-centre and the flange plates where it rivets into the frame are all off to one side. This is because the frame was an inch wrong at the front and the entire front end, floors, outer skins, bulkheads, the lot, were offset at Samlesbury to compensate.
I'm only a plumber from Cannock...
"As to reward, my profession is its own reward;" Sherlock Holmes.
'It ain't what they call you, it's what you answer to.' W.C. Fields.
"As to reward, my profession is its own reward;" Sherlock Holmes.
'It ain't what they call you, it's what you answer to.' W.C. Fields.
-
- Posts: 712
- Joined: Thu Sep 24, 2009 11:19 pm
Re: Pic of the Day
Excellent shot of the boat being put on to her dolly.Now getting ready for fitting the systems into the old girl And the left hand side of the workshop floor is clear of all those panels. Nicely put away upstairs by my good self and Jersey Mike along with the Flutes etc to get the workshop nice and clean and free of clutter. The upstairs is all sorted now and back in a usable condition with lots more space to boot. Even Mike's fabrics can be gotten to without clambering over all sorts of items. Taken a while on Saturday but got there in the end job done.SO KEEP IT TIDY AND PUT BACK WHAT YOU PULL OUT
Novie
Feeling rather better for being free of dust
Novie
Feeling rather better for being free of dust
"Never ride faster than your Angel can fly"
Re: Pic of the Day
Nice to see some rivets going back into the transom.
-
- Posts: 45
- Joined: Sun Dec 20, 2009 2:42 pm
Re: Pic of the Day
Nice to see the pic of the expensive, impromptu coffee table.
So, the question is, whose mug belongs to whom?
We have, Terry Thomas, RAF roundel, Betta Blast, and Captain Pugwash...
Guss who? Hehe, this could be a good game.
So, the question is, whose mug belongs to whom?
We have, Terry Thomas, RAF roundel, Betta Blast, and Captain Pugwash...
Guss who? Hehe, this could be a good game.
- Renegadenemo
- Posts: 5176
- Joined: Mon Dec 01, 2008 12:29 pm
- Location: N E England
- Contact:
Re: Pic of the Day
Go on then - have a guess.So, the question is, whose mug belongs to whom?
I'm only a plumber from Cannock...
"As to reward, my profession is its own reward;" Sherlock Holmes.
'It ain't what they call you, it's what you answer to.' W.C. Fields.
"As to reward, my profession is its own reward;" Sherlock Holmes.
'It ain't what they call you, it's what you answer to.' W.C. Fields.
Re: Pic of the Day
Sorry, don't recognise anything - it's all too clean ...
1 in 10 people understands binary. The other one doesn't
-
- Posts: 376
- Joined: Fri Dec 05, 2008 8:53 pm
- Location: sandbach cheshire
Re: Pic of the Day
Not enough "culture" in that pic
The world is full of Kings and Queens; who blind your eyes, then steal your dreams..
Re: Pic of the Day
Great view in today's pic!
-
- Posts: 98
- Joined: Fri Mar 30, 2012 12:17 pm
- Location: Worcestershire
Re: Pic of the Day
Interesting pic today - 16 December. Fascinating detail.
Is the suggestion that this fitting was in effect a potential 'choke' in the fuel line, OK for normal duty but perhaps a limitation when the engine was pushed hard? Was this the same fitting as used with the earlier Beryl fuel system or was it new with the Orpheus installation in 1966?
What are the indications that lead you to feel it should have been one inch bore diameter rather than 0.75 inch? Is the rest of the fuel system one inch bore?
Is the suggestion that this fitting was in effect a potential 'choke' in the fuel line, OK for normal duty but perhaps a limitation when the engine was pushed hard? Was this the same fitting as used with the earlier Beryl fuel system or was it new with the Orpheus installation in 1966?
What are the indications that lead you to feel it should have been one inch bore diameter rather than 0.75 inch? Is the rest of the fuel system one inch bore?
Re: Pic of the Day
So are you considering opening up the inlet to 1" to ensure efficient running or leave it as is?
Love pic of the day every day, by the way!
Love pic of the day every day, by the way!