Not sure what is meant by that but the major splashes were the front spar, the steering box and right hand cockpit rail and the left hand cockpit wall in that order.It doesn’t take a genius to work out what caused one of the splashes
Technical Talk
- Renegadenemo
- Posts: 4748
- Joined: Mon Dec 01, 2008 12:29 pm
- Location: N E England
- Contact:
Re: Technical Talk
I'm only a plumber from Cannock...
"As to reward, my profession is its own reward;" Sherlock Holmes.
I have wrought my simple plan
If I give one hour of joy
To the boy who’s half a man,
Or the man who’s half a boy.
Sir Arthur Conan Doyle.
"As to reward, my profession is its own reward;" Sherlock Holmes.
I have wrought my simple plan
If I give one hour of joy
To the boy who’s half a man,
Or the man who’s half a boy.
Sir Arthur Conan Doyle.
-
- Posts: 6
- Joined: Fri Nov 04, 2016 12:15 pm
Re: Technical Talk
Thanks for clearing up the enquiry gentlemen. E en if it did show me up as something of an idiot. As the articles responsible for the splashes weren’t at all what I thought they were
- Renegadenemo
- Posts: 4748
- Joined: Mon Dec 01, 2008 12:29 pm
- Location: N E England
- Contact:
Re: Technical Talk
Fab little doco / interview here with the genius behind the Orph', amongst his many other achievements. Not to be missed.
https://www.youtube.com/watch?v=by4lH2whhjk
https://www.youtube.com/watch?v=by4lH2whhjk
I'm only a plumber from Cannock...
"As to reward, my profession is its own reward;" Sherlock Holmes.
I have wrought my simple plan
If I give one hour of joy
To the boy who’s half a man,
Or the man who’s half a boy.
Sir Arthur Conan Doyle.
"As to reward, my profession is its own reward;" Sherlock Holmes.
I have wrought my simple plan
If I give one hour of joy
To the boy who’s half a man,
Or the man who’s half a boy.
Sir Arthur Conan Doyle.
-
- Posts: 18
- Joined: Sun Aug 19, 2018 9:36 pm
Re: Technical Talk
Been following the twitter feed / pics for a while now.
Something that intrigued me today...re original & new panels - it looks like only parts of original panels are there? How did you integrate original with new and have you found any of the original parts to have any particular metal fatigue weakness?
Bit of a newbie question I know...
Something that intrigued me today...re original & new panels - it looks like only parts of original panels are there? How did you integrate original with new and have you found any of the original parts to have any particular metal fatigue weakness?
Bit of a newbie question I know...
- Renegadenemo
- Posts: 4748
- Joined: Mon Dec 01, 2008 12:29 pm
- Location: N E England
- Contact:
Re: Technical Talk
If you have a dig back through the diary you'll find lots of how we did it but essentially what happened when we had an old and wrecked panel was to build a brand new one from fresh material that was a perfect fit then gradually cut it away and let in the old, damaged material, adjusting the shape as we went until old had completely supplanted new but with its shape returned. We called it 'conserveering'. The museum types wanted it all left bashed and broken but it was useless like that (we did leave some parts bashed up to tell the story and things like the old air intake skins, which are on display in the museum) but mostly we could make it good again. Conservation meets engineering - get it?Something that intrigued me today...re original & new panels - it looks like only parts of original panels are there? How did you integrate original with new and have you found any of the original parts to have any particular metal fatigue weakness?
The old panel you saw tonight on Twitterface departed the scene wrapped around the end of the front spar and so is mostly original. The sponson noses are new-build so they need almost no fettling ahead of the blue paint.
As regards fatigue, etc. There was some age-hardening of some of the more exotic materials and some were heat-treated to give them certain properties but such things can be reversed, corrected and made good with appropriate heat treatments, which we used where necessary. That along with x-raying the frame and using dye-penetrant or fluorescent/UV testing on any safety critical parts left us completely confident that we've left nothing of concern lurking in the structure. It's been a pretty thorough job.
I'm only a plumber from Cannock...
"As to reward, my profession is its own reward;" Sherlock Holmes.
I have wrought my simple plan
If I give one hour of joy
To the boy who’s half a man,
Or the man who’s half a boy.
Sir Arthur Conan Doyle.
"As to reward, my profession is its own reward;" Sherlock Holmes.
I have wrought my simple plan
If I give one hour of joy
To the boy who’s half a man,
Or the man who’s half a boy.
Sir Arthur Conan Doyle.
Re: Technical Talk
I recall the panel which Bill is currently working on, I spent a large amount of time making a perfect (if I do say so myself) reproduction, unaware of the intention to merely use it as a buck to fix the original fabric (which I didn’t know we had)
Indeed it was an Alfred Hitchcock moment when Bill and Mike produced the wreckage from the store, and whilst sniggering somewhat, theycset about hacking into my work of art.
Ultimately it was for the right cause, it resulted in the correct shape being obtained and the original fabric being returned.
Indeed it was an Alfred Hitchcock moment when Bill and Mike produced the wreckage from the store, and whilst sniggering somewhat, theycset about hacking into my work of art.
Ultimately it was for the right cause, it resulted in the correct shape being obtained and the original fabric being returned.
Clarence come out ov zat tank at vonz !